Kits Solares SOL-MATIC System
Solar equipment of the drain back type ready for Domestic Hot Water (DHW) production. The solar collector heats the transporter fluid that moves thanks to the solar primary circuit pump from the heat exchanger inside the accumulator to the collector. The tranport fluid transfers the absorbed thermal energy to the domestic water that is in the accumulator. The auxiliary heating can be done through the optional electric resistance, via gas wall mounted boiler connected to the DHW exit of the accumulator, or another back-up in paralel connected to the upper coil.
Ficha técnica do produto
| Código | Modelo | Preço (s/IVA) | Disponibilidade | Comprar |
|---|---|---|---|---|
| 2701-0401 | SOL-MATIC 150 Solar System | Entrar no My Zantia |
Principais Características
The system includes collector(s), water heater, hydraulic group, circulation pump, solar controller and 2,5 liters of anti-freezing ;
- Capacities: 150 liters;
- Accumulators of 1 exchanger;
- No risk of freezing;
- No risk of overheating;
- Collectors of horizontal assembly;
- Collectores' connections (left or right);
Note: Mounting structure sold separately.
Especificações Técnicas
| Technical data | SOL-MATIC 150 |
|---|---|
| Collector model | Climasol H |
| Nr of collectors | 1 |
| Opening area (m 2) | 2,02 |
| Collectors' installation* | inclined roof or flat roof |
| Collectors' orientation | assembly in horizontal format |
| Material for solar circuit (nont included) | Copper tube of 15 mm |
| Circuit length (impulsion and return) [m] | 5 to 30 |
| Maximum service pressure [bar] | 3 |
| Height of the system [m] | 1 to 12 (from the base of the accumulador to the base of the collector) |
| Minimum service temperature | anti-freeze supplied, protection up to -17 C |
| Liquid in the solar circuit | mixture of water and propylene glycol at 33% (7,3L) |
| Protection against over-temperature | limit of the water temperature in the accumulator |
| Accumulator nominal volume [L] | 150 |
| Total height of the accumulator (with insulation) [mm] | 940 |
| Accumulator diameter (with insulation) [mm] | 590 |
| Maximum pressure. / max. temperature. in the accumulator [bar/ C] | 6 / 90 |
| Protection against oxidation | vitrified according to EN60335 |
| Cathodic protection | Double magnesium anode |
| Hot water/cold water connections | 3/4" M |
| Temperature probe placed | in the lower part of the accumulator |
